Ingredients and safety stuff

Single step mineral paint ingredients consist of acrylic paint base, pigment, a proprietary blend of all natural minerals and food-safe products, and PVA.

Ingredient list: acrylic paint base, amylose, amylopectin, polyvinyl acetate, free crystalline silica, calcium carbonate.


*little to no VOC's, varies by color.
NOT FOR HUMAN CONSUMPTION
KEEP OUT OF REACH OF CHILDREN
EYE IRRITANT, flush thoroughly with water if contact is made.
POSSIBLE SKIN IRRITANT. Wash thoroughly with soap and water.

SPILL HANDLING:

Clean with soap and water, dispose of paint and cleaning materials inside plastic bag and throw away.


 

 

MDSD Information

 

MATERIAL SAFETY DATA SHEET Trewax Paste Wax

Revised 10/30/2014

-------------------------------------------------------------------------------

BEAUMONT PRODUCTS, INC. 1560 BIG SHANTY DRIVE, KENNESAW, GA 30144 TELEPHONES: 1-800-451-7096 1-770-514-9000 FAX 1-770-514-7400

24-hour Emergency Number for USA & Canada: 1-800-255-3924
24-hour Emergency Number for International: 00-1-813-248-0585 (call collect) --------------------------------------------------------------------------------

NAME: Product Code Product Type

SECTION 1 Product TREWAX Clear Paste Wax 887101016, 887171853 Paste Wax

Flammability Reactivity PPE Health 120A

  • 0=  minimal hazard
  • 1=  slightly hazard
  • 2=  moderate hazard
  • 3=  serious hazard
  • 4=  severe hazard

* DGIS

--------------------------------------------------------------------------------

SECTION 2 - HAZARDOUS INGREDIENTS

Petroleum Distillate CAS #64742-47-8 WT%=74

---------------------------------------

SECTION 3 - HEALTH HAZARD & FIRST AID

  1. Acute Health Effect None 2. Chronic Health Effects None 3. Carcinogen NO 4. Primary Entry Routes:
  2. a) Skin & Eyes: Prolonged contact with the skin may cause dryness. Eye contact may be slightly irritating.
b) Ingestion: May be harmful.
c) Inhalation: Not considered an entry route.
  3. First Aid:
a) Skin: Remove contaminated clothing-wash skin with soap & water.
If irritation persists get medical attention.
b) Eyes: Wash eyes with large volumes of water for at least 15 minutes while lifting the upper and lower eyelids and rotating the eyeball. Get medical attention if irritation persists.
c) Ingestion: Give large volumes of water. Do not induce vomiting. Get medical attention.
d) Inhalation: N/A

 PC 887101016

--------------------------------------------------------------------------------

SECTION 4 Physical & Chemical Characteristics

  1. Physical State
2. Color
3. Odor
4. Solubility in water
5. Specific Gravity (H2O=1.0) 6. pH
  2. Freezing Point 8. Flash Point
9. Vapor Pressure

Paste
Pale cream Solvent Insoluble 0.754
N/A
N/A
N/A
0.5

--------------------------------------------------------------------------------

SECTION 5 Fire and Explosion Hazard

  1. Flash Point
2. Extinguishing Media
3. Special Fire Fighting Procedures 4. Unusual Fire & Explosion Hazard

N/A
Dry Chemical, Foam, CO2
None
Fire fighters should observe all precautions that apply to any fire where chemicals are stored.

-------------------------------------------------------------------------------

SECTION 6 - Reactivity Data

  1. Stability Stable
2. Conditions to Avoid None Known
  2. --------------------------------------------------------------------------------

SECTION 7 - SPILL OR LEAK PROCEDURES

  1. If product leaks or spills - Soak-up with dry absorbent. Dispose in
suitable container.
2. Abide by Federal, State, and Local regulations. --------------------------------------------------------------------------------

SECTION 8 - PERSONAL PROTECTION

None Required

--------------------------------------------------------------------------------

SECTION 9 - SPECIAL PRECAUTIONS

  1. Store containers tightly closed and in an upright position.
2. Do not destroy or deface the label. --------------------------------------------------------------------------------

SECTION 10 - SECTION 313 SUPPLIER NOTIFICATION (SARA)

This product contains the following toxic chemicals subject to the reporting requirements of Section 313 of the Emergency Planning and Community Right-To-Know Act of 1986 and of 40 CFR 372:

None

--------------------------------------------------------------------------------

 

Page 3 of 3 PC 887101016

--------------------------------------------------------------------------------

SECTION 11 Toxicological Information

None

--------------------------------------------------------------------------------

SECTION 12 Ecological Information

None --------------------------------------------------------------------------------

SECTION 13 Disposal Considerations

  1. See Section 7 above.
  2. --------------------------------------------------------------------------------

SECTION 14 DOT Transport Information

  1. This product is in Package Group II.
  2. 2 lbs. containers and smaller are classed as CONSUMER COMMODITY ORM-D 
thus are exempt from regulation.
  3. Packages larger than 2.2 lbs. ARE regulated.

4.
Proper Shipping Name
Flammable solids, organic,

--------------------------------------------------------------------------------

SECTION 15 Other Regulatory Information

All ingredients appear on the TSCA Inventory List.

--------------------------------------------------------------------------------

SECTION 16 Other Information

  1. N/A = Not Applicable
  2. *Dangerous Goods Identification System (DGIS)
  3. PMCC = Pensky Martin Closed Cup
  4. Manufacturer believes that the information given here is accurate. The 
suggested procedures are based on experience and common sense and are not necessarily all-inclusive of every conceivable circumstance.

The Bill of Lading Class ID PG 4.1 UN 1325 II

Hazardous Material

n.o.s.(contains Petroleum distillates)

 

 

SINGLE STEP PAINT MATERIAL SAFETY DATA SHEET

The information contained herein is based on

data available at the time of preparation of this data sheet which SQUIRREL HOUSE DESIGNS, LLC believes to be reliable. However, no warranty is expressed or implied regarding the accuracy

of this data. SQUIRREL HOUSE DESIGNS, LLC shall not be responsible for the use of this information, or of any product, method or apparatuses mentioned and you must make your own determination of its

Suitability and completeness for your own use, for the protection of the environment, and the health and safety of your employees and the users of this material

.

Complies with OSHA hazard communication standard

29CFR191

0.1200.

Prepared 10/31/2014

Squirrel House Designs, LLC,

DBA Fairy Chalk Mother’s single step paint 84653

Salem, Utah

EMERGENCY TELEPHONE NO. (801) 423-7395

HAZARDS IDENTIFICATION (ANSI Section 3)

Primary route(s) of exposure: Inhalation, skin contact, eye contact, and ingestion.

Effects of overexposure: Inhalation: Irritation of respiratory tract, lungs. Prolonged inhalation may lead to headache, nausea, coughing, and difficulty of breathing, severe lung irritation or damage, pneumoconiosis.

Skin contact: Irritation of skin.

Eye contact:

Irritation of eyes. Prolonged or repeated contact can cause redness of eyes.

Ingestion: Ingestion may cause mouth and throat irritation, nausea, vomiting, diarrhea, gastro-intestinal disturbances, and abdominal pain.

Medical conditions aggravated by exposure: Eye, skin, respiratory disorders, lung disorders, asthma-like conditions.

 

FIRST-AID MEASURES (ANSI Section 4)

Inhalation: Remove to fresh air. Restore and support continued breathing. Get emergency medical attention. Have trained person give oxygen if necessary. Get medical help for any breathing difficulty. Remove to fresh air if inhalation causes eye watering, headaches, dizziness, or other discomfort.

Skin contact: Wash thoroughly with soap and water. If any product remains, gently rub petroleum

jelly, vegetable or mineral/baby oil onto skin. Repeated applications may be needed. Remove contaminated clothing.

Wash contaminated clothing before re-use.

Eye contact:

Flush immediately with large amounts of water, especially under lids for at least 15 minutes. If irritation or other effects persist, obtain medical treatment.

Ingestion: If swallowed, obtain medical treatment immediately.

 

FIRE-FIGHTING MEASURES (ANSI Section 5)

Fire extinguishing media: Dry chemical or foam water fog. Carbon dioxide. Closed containers may

burst if exposed to extreme heat or fire. Fire fighting procedures: Water may be used to cool and protect exposed containers. Firefighters should use full protective clothing, eye protection, and self-contained breathing apparatus. Hazardous decomposition or combustion products: Carbon monoxide, carbon dioxide. Vinyl acetate monomer acrylic monomers. Acetaldehyde.

 

ACCIDENTAL RELEASE MEASURES (ANSI Section 6)

Steps to be taken in case material is released or spilled: Comply with all applicable health and

Environmental regulations. Eliminate all sources of ignition. Ventilate area. Evacuate all unnecessary

Personnel. Place collected material in proper container. Spilled material is extremely slippery.

Complete personal protective equipment must be used during cleanup. Large spills - shut off leak if

safe to do so. Dike and contain spill. Pump to storage or salvage vessels. Use absorbent to pick up

Excess residue. Keep salvageable material and rinse water out of sewers and watercourses. Small spills - use absorbent to pick up residue and dispose of properly.

 

HANDLING AND STORAGE (ANSI Section 7)

Handling and storage: Store below 100f (38c). Keep from freezing.

Other precautions: use only with adequate ventilation. Do not take internally. Keep out of reach of children. Avoid contact with skin and eyes, and breathing of vapors. Wash hands thoroughly after

handling, especially before eating or smoking. Keep containers tightly closed and upright when not

in use. Avoid conditions which result in formation of inhalable particles such as spraying or abrading

(sanding) painted surfaces. If such conditions cannot be avoided, use appropriate respiratory protection as directed under exposure controls/personal protection. Ground equipment when transferring to prevent accumulation of static charge. Wear clean work clothing daily.

 

EXPOSURE CONTROLS/PERSONAL

PROTECTION (ANSI Section 8)

Respiratory protection: Control environmental concentrations below applicable exposure standards

when using this material. When respiratory protection is determined to be necessary, use a NIOSH/MSHA (Canadian z94.4) Approved elastomeric sealing- surface facepiece respirator outfitted with organic vapor cartridges and paint spray (dust/mist) prefilters. Determine the proper level of protection by conducting appropriate air monitoring. Consult 29CFR1910.134 For selection of respirators (Canadian z94.4).

Ventilation: Provide dilution ventilation or local exhaust to prevent build-up of vapors. Personal protective equipment: Eye wash, safety shower, safety glasses or goggles. Impervious gloves, impervious clothing.

 

STABILITY AND REACTIVITY (ANSI Section 10)

Under normal conditions: Stable see section 5 fire fighting measures. Materials to avoid: Oxidizers, amines, hydrofluoric acid. Styrene monomer. Conditions to avoid: Elevated temperatures, freezing.

Hazardous polymerization: Will not occur

 

TOXICOLOGICAL INFORMATION (ANSI Section 11)

Supplemental health information: No additional effects are anticipated.

Carcinogenicity: The international agency for research on cancer (IARC) has classified titanium

Dioxide as possibly carcinogenic to humans (group 2b) based on inadequate evidence of carcinogenicity in humans and sufficient evidence of carcinogenicity in experimental animals. Reproductive effects: No productive effects are anticipated. Mutagenicity: No mutagenic effects are anticipated. Teratogenicity:

No teratogenic effects are anticipated

 

ECOLOGICAL INFORMATION (ANSI Section 12)

No ecological testing has been done by SQUIRREL HOUSE DESIGNS, LLC

on this product as a whole.

 

DISPOSAL CONSIDERATIO

NS (ANSI Section 13)

Waste disposal:

Dispose in accordance with all applicable regulations. Avoid discharge to natural waters.

 

REGULATORY INFORMATION (ANSI Section 15)

As of the date of this MSDS, all of the components in this product are listed (or are otherwise exempt

from listing) on the TSCA inventory. This product has been classified in accordance with the hazard

criteria of the CPR (controlled products regulations) and the MSDS contains all the information

required by the CPR. Form: GL41X, Page 2 of 2, prepared 10/31/2014

 

Ingredients

Product Codes with % by Weight (ANSI Section 2)

Chemical Name Common Name CAS. No. GL 411 GL 412 GL 413 Pumice, silicon oxide 1332-09-8 5-10, kaolin clay 1332-58-7 1-5 10-20 titanium oxide, titanium dioxide 13463-67-7 10-20 5-10 nepheline syenite, feldspar-type minerals 37244-96-5 1-5 glass, oxide, chemicals, glass oxide 65997-17-3 1-5 1-5 ethene, homopolymer, oxidized polyethylene wax 68441-17-8 10-20 water, water 7732-18-5 40-50 50-60 50-60 vinyl acetate/acrylic copolymer, vinyl acetate/acrylic copolymer Sup. Conf. 10-20 20-30 acrylic resin, acrylic resin Sup. Conf. 10-20

 

Chemical Hazard Data

(ANSI Sections 2, 8, 11, and 15)

 

ACGIH-TLV OSHA-PELS.R.Std.S2 S3 CC

Common Name CAS. No. 8-Hour TWA STEL C S 8-Hour TWA STEL C S H M N I O silicon oxide 1332-09-8 .1 mg/m3 not est. not est. not est. .1 mg/m3 not est. not est. not est. not est. clay 1332-58-7 2 mg/m3 not est. not est. not est. 5 mg/m3 not est. not est. not est. not est. titanium dioxide 13463-67-7 10 mg/m3 not est. not est. not

est. 10 mg/m3 not est. not est. not est. not est. feldspar-type minerals 37244-96-5 not est. not est. not es

  1. not est. not est. not est.not est. not est. not est. glass oxide 65997-17-3 10 mg/m3 not est. not est. not

est. 5 mg/m3 not est. not est. not est. not est. polyethylene wax 68441-17-8 not est. not est. not est. no

t est. not est. not est. not

est. not est. not est. vinyl acetate/acrylic copolymer Sup. Conf. not est. not est. not est. not est. not est. not est. not est. not est. not est. Footnotes:H=Hazardous Air Pollutant, M=Marine Pollutant C=Ceiling - Concentration that S=Skin - Additional exposure, n/a=not applicable ppm=parts per million S2=Sara Section 302 EHS P=Pollutant, S=Severe Pollutant

should not be exceeded, over and above airborn exposure, not est=not established mg/m3=milligrams per cubic meter S3=Sara Section 313 Chemical Carcinogenicity Listed By:even instantaneously. may result from skin absorption. CC=CERCLA Chemical Sup Conf=Supplier Confidential S.R.Std.=Supplier Recommended Standard N=NTP, I=IARC, O=OSHA, y=yes, n=no